华为M21卡口摄像机室内吊装步骤讲解【图文】

2019-09-09

华为M21卡口摄像机室内吊装步骤

1、Place the mount in the desired installation position. Use a marker to mark the screw locations. Use an 8 mm drill bit to drill the holes to a depth of about 55 mm. Use a hammer to carefully drive the white plastic expansion tubes into the holes.
将支架放置于安装位置, 使用记号笔绘制螺钉安装位置,选择直径为8mm 的钻头,钻取深约55mm 的导孔。 使用羊角锤将白色膨胀管打入钻好的孔内。
室内吊装步骤图1.jpg
2、Install the pendant mount.
安装吊装支架
室内吊装步骤图2.jpg
3、Remove the screws from the sunshield above the camera and fix the camera to the pendant mount.
拧下摄像机上方遮阳罩的螺钉,将摄像机固定在吊装支架上。
室内吊装步骤图3.jpg
相关案例